Quick Detail

● Spindle speed range: 40-1600r/min

● Working desk size: 2100×500mm

● Maximum load: 1500kg

● X axis travel: 1500mm

● Y axis travel: 600mm

● Z axis travel: 5700mm

Description

The horizontal milling and boring machine is suitable for processing large and medium-sized parts and box-shaped parts for rough and fine boring, milling and other processes, which can meet the requirements of turning-around processing of large parts.

Main features

● The appearance of beautiful and generous overall layout coordination.

● Fuselage, vertical column, sliding seat are all rectangular guide, good stability.

● Guide rail to take automatic quenching, high wear resistance.

● Digital synchronous display, intuitive and accurate, can improve the efficiency of low cost.

SP715 1

SP715 4

SP715 2

SP715 5

Applications

Horizontal milling and boring machine is suitable for box-shaped part hole and plane machining with many processes, turning of outer cylindrical surface, cutting of annular groove in hole, tapping metric and inch threads, etc. which can meet the requirements of rough and fine machining, the horizontal milling and boring machine is a large-scale CNC high-efficiency, precise and general-purpose machining equipment.

Product application

● This machine is suitable for machining the parts of single piece or small batch production in the machine shop.

● Drilling, boring and hinge hole can be carried out on the machine tool.

Specifications

Model	Unit	SP715 Boring Machine
Spindle
Spindle end inner cone specification		NT50
Spindle speed range	r/min	40-1600
Distance from spindle end face to worktable surface	mm	150-720
Table
Distance from spindle center to column guide rail surface	mm	630
Working desk size	mm	2100×500
Number, width and spacing of T-slots	mm	5-18×80
Maximum load	kg	1500
Rail
Rail type		All hardened rectangular hard rails
Single rail width X/Y/Z axis	mm	85/85/102
Screw specification
X axis	mm	φ40×10
Y axis	mm	φ50×10
Z axis	mm	φ40×10
Travel
X axis	mm	1500
Y axis	mm	600
Z axis	mm	570
Maximum rapid traverse speed
X axis	m/min	5
Y axis	m/min	5
Z axis	m/min	5
Cooling
Cooling pump power	W	460
Cooling pump flow	L/min	25
Cooling box volume	L	280
Lubrication type		Automatic
Machine tool positioning accuracy	mm	0.03
Repeatability of machine tool positioning accuracy	mm	0.02
AC voltage	V	3～ 380±10%
frequency	Hz	50±10%
Total electricity capacity	KVA	20
Total air source pressure	MPa	0.5-0.7
Total machine weight	kg	7500
Dimensions: left and right x front and rear x up and down (L x W x H)	mm	2600×2400×2560mm